Cooling TCS food: a practical two-stage log

The widely taught two-stage cooling method — 135°F to 70°F in 2 hours, then down to 41°F within 6 hours total — with a printable log, and a clear reminder that your local health department’s rule comes first.

Updated 17 November 2026 · Hosmere

Check your local health department before you treat the times and temperatures below as your rule. In the United States, cooling requirements are set by your state and by your city or county health department. The two-stage method described here is the method in the FDA Food Code, which is a model code. States adopt it at different times and sometimes with changes. This guide is not legal advice, it is not a claim that your kitchen complies with the Food Code or with any state or local rule, and Hosmere is not endorsed by the FDA or by any health department.

This guide is for independent restaurants, cafés and bars in the United States that cool cooked time/temperature control for safety food (TCS food) to hold it cold and use later. Harmful bacteria grow quickly while that food sits in the temperature danger zone. The job is to bring the temperature down in a controlled way, then get the food into cold storage, covered and labelled — and to write down what you did.

What the model Food Code says about cooling

The current model is the FDA Food Code 2022. An FDA educational sheet for food employees, Cooling Cooked Time/Temperature Control for Safety Foods and the FDA Food Code (July 2024), sets out the two-stage process in plain language:

  • Cool cooked TCS food from 135°F (57°C) to 70°F (21°C) within 2 hours (the “rapid cool” stage).
  • Then continue cooling so that the food reaches 41°F (5°C) or less within a total of 6 hours from 135°F — commonly taught as a further 4-hour window from 70°F to 41°F.

The same sheet notes that if the food reaches 70°F before the two hours are up, you have the remaining time, within that six-hour total, to reach 41°F or less. It also describes the temperature danger zone as the range in which food is most susceptible to pathogen growth, usually between 41°F and 135°F (5°C and 57°C).

Those figures are model guidance. They are widely taught, and many local codes use them. They are not automatically the law in every county. If your health department, your HACCP plan or your local code sets different times or temperatures, those are the figures you work to and record against.

Methods that actually speed cooling

The same FDA sheet, pointing to Food Code section 3-501.15, lists methods you can use, one or more at a time: placing food in shallow pans; separating it into smaller or thinner portions; using rapid cooling equipment such as a blast chiller; stirring food in a container set in an ice-water bath; using containers that transfer heat well; or adding ice as an ingredient, among other effective methods. When the containers go into a cooler, they should be arranged for heat transfer through the container walls, and they should be loosely covered — or uncovered if they are protected from overhead contamination — while the food is still cooling.

A deep, steaming stockpot in a crowded walk-in works against you. It warms the other food, slows the batch you were trying to chill, and can leave the centre of the pot in the danger zone for far too long. Cool it down first, then refrigerate it.

Pre-chill the shallow pans if you can. Do not stack tight-lidded deep containers in the walk-in and hope. Stir so the temperature is even, and always probe the centre — the last place to cool — with a clean, sanitized thermometer. Do not guess a number you did not take.

A worked example (illustrative only)

The figures below are a made-up example for a fictional kitchen, Cedar & Vine, to show how a log line is filled in. They are not a recommended time, and they are not a claim about a particular recipe. A pan of chili comes off the stove at 2:10 p.m. The cook splits it into two shallow hotel pans, stands them in an ice bath, and stirs. A clean probe in the centre of one pan reads 168°F (76°C) at 2:10 p.m., 68°F (20°C) at 3:55 p.m., and 40°F (4°C) at 6:40 p.m. The pans are then covered, labelled and placed in the walk-in. The log shows the food, the batch size, the method, the times, the temperatures and the cook’s initials. If the chili had still been above 70°F (21°C) at 4:10 p.m., the entry would be the action — recooked, or discarded — and why. The example sheet in the Excel workbook uses this kitchen and is labelled as illustrative only.

What to write down

A good cooling line answers: what the food was and how much of it; when cooling started, and at what temperature; which method you used; the time and temperature when the food reached 70°F (21°C), or the check that showed it had not; the time and temperature when it reached 41°F (5°C) or less; who took the readings; and, if the batch was too slow, what you did.

Download the TCS food cooling log

Printable PDF (Letter) · Excel workbook (includes a clearly labelled illustrative example sheet) · CSV

The sheet is a practical record, not official FDA or health-department stationery, and it does not replace your own food-safety plan. If your jurisdiction already issues a cooling form, use that. Confirm the times and temperatures with your local health department.

Cold-holding once the food is in the refrigerator is covered in the guide to restaurant refrigerator and freezer temperature logs.

If a batch is too slow

If the food has not reached 70°F (21°C) in the first two hours, or has not reached 41°F (5°C) in the six-hour total — or whatever tighter times your own plan uses — follow that plan. In many kitchens the honest actions are to recook the food, if that is appropriate and safe for that dish, or to discard it, and to write down what went wrong. Then look at the method: portions too large, not enough ice, a deep container, a warm corner of the walk-in, or enough volume that a blast chiller would be the next step.

Do not “rescue” a slow cool by putting a still-hot pan into the refrigerator and hoping a later reheat will put it right. Reheating does not undo time already spent in the danger zone.

How Hosmere Safety can help

Hosmere Safety is built for the daily records of a kitchen, including cooking, cooling, reheating and hot-holding readings. A reading outside the safe range set in your system cannot be saved without a corrective action, and you can export a period as a PDF or a CSV. Any country preset is only a starting point; the owner can change the limits. Hosmere does not certify your kitchen and is not endorsed by the FDA or your health department. If you want to see the layout before you commit, you can open the demo without creating an account:

Try the Safety demo

You can also start a 14-day trial, no card needed, from the Safety product page, or compare plans on the pricing page. Device-only use, without an account, is free forever.

Frequently asked questions

Is the 2-hour / 4-hour cooling rule a federal law?

No. It is the two-stage cooling method in the FDA Food Code, which is a model code for state and local adoption. Many health departments use it. Yours may use a different edition or a different wording. Follow the rule that actually applies to your kitchen.

What if the food reaches 70°F in 45 minutes?

The FDA employee sheet says that if 70°F is reached before 2 hours, you have the remaining time, within the six-hour total from 135°F, to reach 41°F or less. Still, cool it as quickly as you reasonably can, and write the actual times down.

Can I put hot food straight into the walk-in?

A deep, genuinely hot container can warm the other food and slow its own cooling. Official educational material tells you to use shallow pans, smaller portions and ice baths or rapid-cooling equipment, and to arrange containers for heat transfer. Cool the batch first, then hold it cold.

Do I have to keep a cooling log?

Your local code and your inspector decide what records you must keep. A clear log is one of the simplest ways to show that a batch actually met the times you work to. If your health department already issues a form, use that.

Guides for US kitchens