GPS clock-in and clock-out

Rota asks for the phone’s position once, compares it with the site radius, and still lets someone clock in if they are outside or GPS fails — clearly marked.

Updated 15 November 2026 · Hosmere

In Hosmere Rota, when someone taps Check in or Check out, the phone is asked for its position once. The app measures the distance to the site and compares it with that site’s check-in radius (default 150 m; you can set 25–2,000 m under Settings → Sites).

  • Inside the radius: the clock is saved straight away.
  • Outside: the person sees how far away they are and can try again or check in anyway. The record is marked “Outside site area”.
  • Location blocked or failed: they can still check in after confirming. The record is marked “No GPS”.
  • Site has no coordinates: the position is saved if available and marked “Site location not set”. Stand at the site and use “Use my current location” in the site editor, or enter coordinates by hand.

Location is captured only at clock-in and clock-out, and is stored with that clock record. It needs HTTPS (the usual app links provide this). Indoors, accuracy can be 20–100 m, so a slightly larger radius is often useful. Managers can see GPS flags on timesheets and adjust an entry with a reason if needed.

A small heads-up also appears when someone’s week approaches the hours reminder (48 hours by default in the UK and the EU/EEA; you can change it in Settings). It is only a reminder in the rota, not legal advice.

Related guides

All help articles